HumiSeal 1R32 LTX Description
- HumiSeal 1R32 LTX is a fast drying, single component acrylic conformal coating, specifically designed to protect against the effects of moisture, corrosive environments and dirt.
- It is specially formulated with reduced xylene and toluene concentration to be fully compliant with GB30981-2020.
Technical data of HumiSeal 1R32 LTX
Property | Value |
---|---|
Recommended Coating Thickness | 25 - 75 microns |
Drying Time to Handle | 10 minutes per Fed-Std-141, Meth. 4061 |
Recommended Curing Conditions | 24 hrs @ RT or 30 min @ 76°C |
Time Required to Reach Optimum Properties | 7 days |
Recommended Stripper | HumiSeal® Stripper 1080 |
Thermal Shock | 50 cycles per MIL-I-46058C |
-65°C to 125°C | |
Coefficient of Thermal Expansion - TMA | 170 ppm/°C below Tg |
340 ppm/°C above Tg | |
Glass Transition Temperature - DSC | 14°C |
Modulus - DMA | 2000 MPa @ -40°C |
1050 MPa @ 20°C | |
Dielectric Withstand Voltage | >1500 volts per MIL-I-46058C |
Dielectric Breakdown Voltage | 7500 volts per ASTM D149 |
Dielectric Constant, at 1MHz and 25°C | 2.5 per ASTM D150-98 |
Dissipation Factor, at 1MHz and 25°C | 0.01 per ASTM D150-98 |
Insulation Resistance | 8.0 x 10^14 ohms (800TΩ) per MIL-I-46058C |
Moisture Insulation Resistance | 6.0 x 10^10 ohms (60GΩ) per MIL-I-46058C |
Fungus Resistance | Passes per ASTM G21 |
Benefits when using HumiSeal 1R32 LTX
Humiseal 1R32 LTX has the following advantages:
- Protection against moisture, salt / corrosive environments and dirt.
- Easy application with automated systems.
- Easy to cure and dry.
- Low odor in use.
- Low moisture vapor permeability.
- Fluoresces under UV for ease of inspection and is easily repaired.
- Easy removal using Humiseal® Strippers.
- Range of preblends thinners available for different application methods.
Technical data of HumiSeal 1R32 LTX
Application of HumiSeal 1R32 LTX Products
- Conformal coatings can be successfully applied to substrates that have been cleaned prior to coating and also to substrates assembled with low residue “no clean” materials.
- Users should perform adequate testing to confirm compatibility between the conformal coating and their particular assembly materials, process conditions and cleanliness level.
- HumiSeal 1R32 LTX Pre-Blends are specifically diluted to a viscosity for immediate use.
- No additional dilution is required. Customers should establish which Pre-Blend is suitable for their equipment and application method before commercial use.
Storage
- HumiSeal 1R32 LTX and Pre-Blends should be stored away excessive heat or cold, in tightly closed containers.
- HumiSeal products may be stored at temperatures of 0 to 35°C.
- Prior to use, allow the product to equilibrate for 24 hours at a room temperature of 18 to 32°C.
Caution
- Application of HumiSeal Conformal Coatings should be carried out in accordance with local and National Health and Safety regulations.
- The solvents in HumiSeal Conformal Coatings are flammable.
- Material should not be used in presence of open flame or sparks.
- Use only in well-ventilated areas to avoid inhalation of vapours or spray. Avoid contact with skin and eyes.
Where to purchase authentic HumiSeal 1R32 LTX ?
With our reputation, Hicotech has gained the trust of many customers. Contact us now for consultation and to receive the best price for HumiSeal 1R32 LTX product.
Contact information:
Hotline/Zalo. 094 526 1931
Website. Hicotech.com.vn
Email: Sale@hicotech.com.vn
Xem thêm
Tin tức mới nhất
Có 0 đánh giá về HumiSeal 1R32 LTX
5
0 đánh giá
4
0 đánh giá
3
0 đánh giá
2
0 đánh giá
1
0 đánh giá
X
Có 0 bình luận, đánh giá về HumiSeal 1R32 LTX
TVQuản trị viênQuản trị viên